-
Last Updated: 03/28/2025
in Aircuity 101
-
The Information Management System (IMS) runs the IMS service that sequences the Air Data Routers (ADR) to route the air packets from individual test areas to the Sensor Suite (SST) where it is sampled and measurements recorded. Data from the ADR and...
-
Sensor Suite Sensors enable the Aircuity system to cost effectively monitor and control a breadth of environmental parameters throughout a facility. Located within a Sensor Suite, the sensors evaluate an array of environmental conditions using a...
-
The OSC Structured Cable (OSC) is composed of a hollow inner tube used to transport air sample packets, interlaced low voltage power and data communications conductors, and a protective outer sheath. It isprimarily used between the Sensor Suite (S...
-
Last Updated: 10/10/2019
in Aircuity 101 Aircuity Videos Our airside efficiency programs are proven to deliver significant energy savings, reduced deferred maintenance backlog and optimize operations and maintenance costs all while improving indoor environmental air quality. We invite you to view o...
-
The Air Data Router (ADR) provides the means of routing air sample packets and temperature data from the desired test location back to the Sensor Suite (SST) for measurement. The SST and associated ADRs are connected via a backbone consisting of OSC...
-
The Duct Probe (DPB) can be mounted directly on a duct or in an outdoor environment and interfaces with the Air Data Router (ADR) for sensing a multitude of environmental parameters including discrete temperature, and for drawing air samples back ...
-
The Room Probe (RS) is designed with a semi-flush mounted cover that can be optionally painted to match the interior room finishes. The RS interfaces with the Air Data Router (ADR) for room level sensing of a multitude of environmental parameters in...
-
The Sensor Suite (SST) is built on a scalable architecture to accept a variety of sensors for multipoint sampling of a host of indoor environmental parameters. The sensor suite affords distributed, multiplexed based sensing of the monitored areas by...
-
The OT Tubing (OT) is used to transport air sample packets from the test area location back to the Air Data Router (ADR). This tubing is dimensionally stable to allow for reliable use of push-to-connect fittings, is plenum rated, and can be instal...